Tag Archives: Security

Securing your FPGA Design


Let’s start by considering the high-level issues we face as engineers attempting to secure our designs. These include the following:

  1. Competitors reverse engineering our design
  2. Unauthorized production runs
  3. Unauthorized modification of the design
  4. Unauthorized access to the data within the design
  5. Unauthorized control of the end system

The severity and impact of each of these will vary depending upon the end function of the design. In the case of an industrial control system, for example, someone being able to take unauthorized control could be critical and cause untold damage and loss of life. A secure data processing system will place emphasis on integrity of the data being critical. By comparison, in the case of a commercial product, preventing reverse engineering, unauthorized production runs, or even modification might be the driving factors.

Luckily, as engineers, we can use a number of approaches to prevent this sort of thing from happening.

The first, and most critical, is taking control of your design data — source code, schematics, mechanical assemblies, etc. — and ensuring it’s secure. This information is the lifeblood of your company and must be protected all the way through the project life cycle, and beyond, to keep your competitive edge. Sadly, in this age of cyberattacks by anything from individuals to organized groups to nation states, this means having very good firewalls — maybe even an “air gap” — between your design network and one connected to the external world.

There are also efforts that can be undertaken to secure your design within the design process itself. These efforts can be split into the following approaches, which are in no way mutually exclusive:

No. 1: Restrict physical access to the FPGA
One of the first methods that can be undertaken is to limit physical access to the unit — especially the circuit card and the FPGA(s). This involves using methods to detect someone tampering with the unit and taking action suitable for the system upon detection of any threat.

Examples of suitable action would be to safely power down the unit or to erase functional parameters preventing further use of the unit. This is often the case in many industrial control systems or military systems to prevent unauthorized access attempts. Depending upon the end application, other physical methods can be undertaken, such as conformal coating or potting to prevent identification of key components. The use of soldered — as opposed to socketed — components also goes without saying.

No. 2: Encryption of configuration streams
Many applications use SRAM-based FPGAs due to the ability to update the design in the field. Typically, these designs require a configuration device that loads the FPGA configuration at power-up and other times. This configuration data stream may be accessed by a third party (depending upon what physical precautions you have taken).

Many devices these days allow for encryption (normally AES) of the data stream, or even the need to know an encryption key before the device can be programmed further or data read back. Physically, the designer of the PCB can also limit people’s abillity to probe these points by using a multi-layer PCB and by not routing tracks on the top of the board, but instead using internal layers. This is especially efficacious if external termination resistors are not required or can be embedded in the PCB itself (this does add cost)

No. 3: Disable read back or even reconfiguration
Many devices provide the option to prevent the reading back of data over the JTAG interface. Some devices even provide the option to prevent upgrading the device if a certain flag is set, thereby turning a re-programmable device into a one-time programmable (OTP) component. Of course, if you take this course of action, you need to be certain that you will not need to change the design and that you are programming the correct file. (I am sure we have all, at one point, programmed the wrong file into a device. Or is that just me?)

No. 4: Protect that JTAG port
Most access attempts to reverse engineer, modify, or change the functionality of your design are going to be made initially via your JTAG chain. There is a very interesting paper on this topic that you can access by clicking here. It is therefore imperative that you protect your JTAG interface, which should never appear on an external connector, but instead require that the unit be disassembled in order to access the connector.

Ensuring your physical security measures in the field should provide protection over this interface. It’s also a good idea to provide several small chains that can be joined together via numerous tap controllers or external cabling, instead of creating large JTAG chains. Obviously, your design should not indicate on the silk screen where or what the JTAG connectors are. Some more secure designs do not include physical JTAG connectors, but rather just pads on the PCB to which a “bed of nails” type approach can be used to programme the devices.

If the device TAP controller contains the optional TRST pin, then it is possible to fit a zero ohm link to ground programming to hold the TAP in reset, thereby preventing the TAP controller from working. You can do the same with the TCLK pin if the TRST pin is not available. This means your attacker has to find and remove this resistor before the port will work.

No. 5: Differential power analysis
This is a technique that hackers can use to determine when the unit is processing data or when it is idling. As the power profile changes, it is possible to determine a significant amount about the design and the data passing through the system. One solution to this is to ensure the module / system draws the same power regardless of whether it is processing data full-out or while sitting idling, thereby preventing this information from being collected. This requires a more complicated power management and thermal management systems, but can be achieved by means of a shunt regulator, which becomes a constant current load on the main power supply.

No. 6: Design in the ability to detect counterfeits
There is always the possibility that — no matter how many precautions you have taken — your design, or portions thereof, can be copied and reused. However, there are systems you can implement within your code that will enable you to detect if your design has been copied. One potential method is the DesignTag approach from Algotronix, which uses a very unique and innovative method of identifying your design.

The discussions above present just some of the possible threats that are out there, along with a selection of techniques that can be undertaken to secure your design