Blog | Adiuvo Engineering

ADIUVO ENGINEERING BLOG

Electronic Engineering Guide - A 57 Page Guide

Mar 26, 20211 min read

Electronic Engineering Guide - A 57 Page Guide

A simple engineering guide which covers Electronic Design Flow Capacitor and Resistor Selection Grounding Power Distribution Thermal...

0 comments

MicroZed Chronicles: MIPI Imaging on Zynq - Part 2

Adam Taylor

Mar 24, 20213 min read

MicroZed Chronicles: MIPI Imaging on Zynq - Part 2

With the Vivado application completed, we can export the XSA with the BIT file into a Vitis project.

0 comments

MicroZed Chronicles: MIPI Imaging on Zynq - Part 1

Adam Taylor

Mar 19, 20213 min read

MicroZed Chronicles: MIPI Imaging on Zynq - Part 1

In a previous installment, we looked at the Trenz ZynqBerry Zero. Let's create a simple image processing system using the MIPI input.

1 comment

SensorsThink Smart Sensor IoT Board Schematic

Adam Taylor

Mar 12, 20211 min read

SensorsThink Smart Sensor IoT Board Schematic

If you have been following along my latest blog posts on Configuring Zynq and Validating Memory for a Custom Board or Embedded Hour...

0 comments

MicroZed Chronicles: Validating Your Custom Zynq Board Memory

Adam Taylor

Mar 12, 20212 min read

MicroZed Chronicles: Validating Your Custom Zynq Board Memory

In this blog, we will explore how to validate a custom Vivado configuration on a Zynq board.

0 comments

MicroZed Chronicles: Configuring Zynq on a Custom Board

Adam Taylor

Mar 4, 20213 min read

MicroZed Chronicles: Configuring Zynq on a Custom Board

You may have seen my previous posts referencing a book I’ve been writing over the last two years with Dan Binnun and Saket Srivastava on...

0 comments

MicroZed Chronicles: What to do when Zynq doesn't boot

Adam Taylor

Feb 26, 20213 min read

MicroZed Chronicles: What to do when Zynq doesn't boot

I thought it would be a good idea to outline a few of the available debug options for when your Zynq-7000 doesn't boot as expected.

0 comments

MicroZed Chronicles: Hello World from Versal and Vitis

Adam Taylor

Feb 18, 20214 min read

MicroZed Chronicles: Hello World from Versal and Vitis

For this first Versal blog, let's take a look at how to get a bare metal program up and running so that we can say "hello world".

0 comments

MicroZed Chronicles: PYNQ Image for TySOM-3A-ZU19EG

Adam Taylor

Feb 10, 20213 min read

MicroZed Chronicles: PYNQ Image for TySOM-3A-ZU19EG

This blog explores the PYNQ image for the TySOM-3A-ZU19EG, the largest device in the Xilinx Zynq UltraScale+ MPSoC range.

0 comments

MicroZed Chronicles: OpenCL - Creating a Kernel Application and Host Integration

Adam Taylor

Feb 5, 20213 min read

MicroZed Chronicles: OpenCL - Creating a Kernel Application and Host Integration

In this blog, we are going to examine how we can create a simple kernel application and then complete the rest of the host application.

0 comments

MicroZed Chronicles: Getting Started with OpenCL

Adam Taylor

Jan 27, 20214 min read

MicroZed Chronicles: Getting Started with OpenCL

As I mentioned in last week’s blog, I want to spend some time discussing OpenCL because being able to work with OpenCL is going to be an...

0 comments

Getting up and running with the OpenCV AI Cameras

Adam Taylor

Jan 25, 20212 min read

Getting up and running with the OpenCV AI Cameras

I have recently been on a crowd funding spree on KickStarter, along with funding the ZX Spectrum Next and the Looking Glass Portrait, a...

0 comments

MicroZed Chronicles: Setting Up Alveo U50

Adam Taylor

Jan 20, 20213 min read

MicroZed Chronicles: Setting Up Alveo U50

The ability to work with OpenCL at higher levels of abstraction is increasingly important for FPGA developers. We can use OpenCL to...

0 comments

MicroZed Chronicles: GHDL and UVVM Framework

Adam Taylor

Jan 14, 20213 min read

MicroZed Chronicles: GHDL and UVVM Framework

In this post, we will expand the use of GHDL with an open-source verification framework for VHDL called UVVM.

0 comments

MicroZed Chronicles: Installing and Working with GHDL for Verification

Adam Taylor

Jan 7, 20213 min read

MicroZed Chronicles: Installing and Working with GHDL for Verification

In this blog let's look at how to install GHDL and use it to simulate our VHDL designs.

0 comments

MicroZed Chronicles: Vitis HLS and Silexica's SLX Plugin

Adam Taylor

Dec 17, 20203 min read

MicroZed Chronicles: Vitis HLS and Silexica's SLX Plugin

Silexica has released a plugin for Vitis HLS 2020.2 that adds a new pragma that performs loop interchange.

0 comments

How to Get an Engineering Job and Keep It (Part 3)

Clive "Max" Maxfield

Dec 11, 202012 min read

How to Get an Engineering Job and Keep It (Part 3)

In this final installment, we are going to cogitate and ruminate on how you can keep your job, grow in it, and evolve your career.

0 comments

MicroZed Chronicles: Implementing Safe State Machines with Vivado

Adam Taylor

Dec 9, 20204 min read

MicroZed Chronicles: Implementing Safe State Machines with Vivado

I thought I would examine how we can implement safe state machines when using Vivado 2020.2 and Xilinx synthesis

0 comments

Adam Taylor

Dec 2, 20203 min read

MicroZed Chronicles: ZynqBerry Zero

The Trenz ZynqBerry Zero is in the same form factor as the Raspberry Pi Zero, but with a Zynq Z-7010. Let's take a closer look.

0 comments

MicroZed Chronicles: Taking a Look Inside the Tektronix TBS1052C

Adam Taylor

Nov 25, 20203 min read

MicroZed Chronicles: Taking a Look Inside the Tektronix TBS1052C

I need an entry-level scope for a project I am working on so I decided I would pick up a Tektronix TBS1052C and take look at what is inside.

0 comments