Boards | Adiuvo Engineering 2/3

ADIUVO ENGINEERING BLOG

MicroZed Chronicles: Power Design Manager

Jun 14, 20233 min read

MicroZed Chronicles: Power Design Manager

Designing a successful system requires not only the implementation of the algorithms within the programmable logic and processing systems...

0 comments

MicroZed Chronicles: Ethernet on the Digilent Arty A7

Adam Taylor

Jun 6, 20234 min read

MicroZed Chronicles: Ethernet on the Digilent Arty A7

A couple of weeks ago I was emailed about how to get the ethernet working on the Digilent Arty A7 development board. We have covered this...

0 comments

MicroZed Chronicles: Digilent Eclypse Z7 Board

Adam Taylor

May 3, 20233 min read

MicroZed Chronicles: Digilent Eclypse Z7 Board

There is a wide range of development boards on the market today. Some are ideal for beginners who are just learning programmable logic or...

0 comments

MicroZed Chronicles: ZUBoard 1CG and PYNQ

Adam Taylor

Apr 12, 20233 min read

MicroZed Chronicles: ZUBoard 1CG and PYNQ

You might have noticed several posts on the Avnet ZUBoard 1CG over the last six months. This board contains an AMD Xilinx ZU1CG MPSoC...

0 comments

MicroZed Chronicles: Which Dev Board to Start With?

Adam Taylor

Mar 1, 20234 min read

MicroZed Chronicles: Which Dev Board to Start With?

One of the questions I get asked a lot is which development board is the best for (beginner) FPGA and SOC development. Understandably,...

0 comments

MicroZed Chronicles: Which Cost Optimized Device?

Adam Taylor

Jan 18, 20233 min read

MicroZed Chronicles: Which Cost Optimized Device?

For many applications, selecting the most appropriate device is critical. Many of our clients are often questioning which device they...

0 comments

Lattice Propel RISC-V, part one Hardware

Adam Taylor

Nov 14, 20223 min read

Lattice Propel RISC-V, part one Hardware

Over the last few weeks, I have been working on commissioning the Nexus Certus™-NX LFD2NX-40 development board. You can find a previous...

0 comments

MicroZed Chronicles: 7 Series DDR3 Debugging

Adam Taylor

Nov 2, 20222 min read

MicroZed Chronicles: 7 Series DDR3 Debugging

It’s common for many custom FPGA board developments to contain a DDR3 memory. Of course, when we develop a custom board, we need to...

0 comments

MicroZed Chronicles: Avnet ZUBoard – Temperature Sensor

Adam Taylor

Sep 14, 20223 min read

MicroZed Chronicles: Avnet ZUBoard – Temperature Sensor

Ever since the previous overview, I’ve had the Avnet ZUBoard 1CG sitting on my desk. I also just purchased a FLIR C5 thermal imaging...

0 comments

MicroZed Chronicles: The Avnet ZUBoard 1CG

Adam Taylor

Aug 3, 20223 min read

MicroZed Chronicles: The Avnet ZUBoard 1CG

In early June Avnet announced the ZUBoard 1CG, as a compliment to the Ultra96V2 and MiniZed development boards and UltraZed and PicoZed...

1 comment

MicroZed Chronicles: Zynq Power Management – Wake on Interrupt GPIO

Adam Taylor

Jun 1, 20226 min read

MicroZed Chronicles: Zynq Power Management – Wake on Interrupt GPIO

One of the projects we are working on now is battery powered and only acts when awakened on a set schedule. This requires the Zynq-7000...

0 comments

Efinix Trion FPGA and Xyloni Development Board

Adam Taylor

May 19, 20224 min read

Efinix Trion FPGA and Xyloni Development Board

I have heard several attendees mention Efinix FPGAs at a few conferences I have recently attended. As such, I thought I would take a...

0 comments

MicroZed Chronicles: Kria Robotics Starter Kit

Adam Taylor

May 17, 20223 min read

MicroZed Chronicles: Kria Robotics Starter Kit

Over the last few months, we have examined robotics on Kria with the Kria robotics stack (KRS) which enables ROS 2 to be deployed on...

0 comments

Adam Taylor

Apr 26, 20223 min read

MicroZed Chronicles: PYNQ-ZU Board

As I have said several times in this blog, I am a massive fan of the PYNQ framework. We use PYNQ and HLS to accelerate our development...

0 comments

MicroZed Chronicles: Numato Mimas and Narvi Boards

Adam Taylor

Apr 20, 20223 min read

MicroZed Chronicles: Numato Mimas and Narvi Boards

A couple of weeks ago I received the Mimas and Narvi development boards from Numato Labs, both containing Xilinx 7 series devices. The...

0 comments

MicroZed Chronicles: XADC, IIO and PetaLinux

Adam Taylor

Oct 27, 20212 min read

MicroZed Chronicles: XADC, IIO and PetaLinux

Recently we examined Industrial Input and Output drivers in PetaLinux when using an ADC on a Pmod. Of course, all Xilinx devices also...

0 comments

MicroZed Chronicles: Certified Ubuntu on Xilinx SoCs

Adam Taylor

Sep 22, 20213 min read

MicroZed Chronicles: Certified Ubuntu on Xilinx SoCs

Having an embedded Linux operating system is critical for Xilinx heterogeneous SoCs to be able to achieve their full potential. The...

0 comments

MicroZed Chronicles: Real Digital Blackboard

Adam Taylor

Sep 1, 20213 min read

MicroZed Chronicles: Real Digital Blackboard

We have looked at many development boards that are based on Xilinx FPGAs and SoCs during the eight years this blog has been running....

0 comments

Adam Taylor

Jul 7, 20213 min read

MicroZed Chronicles: The 400th Edition

Back on the 29th September 2013, I sat down and wrote what would become the first blog in this series. It was a simple look at how to...

0 comments

MicroZed Chronicles: Kria SoM and Applications

Adam Taylor

May 26, 20213 min read

MicroZed Chronicles: Kria SoM and Applications

One of the big advantages of the Kria SoM is the ease with which new applications can be created, either around the existing applications...

1 comment